Content XL-614S XL-618S 主要规格 Main Specificatints 工作台尺寸Table size 150X350mm(6X4”) 150X450mm(6X18”) 最大研磨长度Maximum grinding length 375mm(14-3/4”) 475mm(14-3/4”) 最大研磨宽度Maximum grinding width 160mm(6-1/3”) 160mm(6-1/3”) 主轴到工作台距离Distance spindle to table 350-400mm(13.8-15.7”) 350-400mm(13.8-15.7”) 标准磁盘尺寸Standard disk size 150X300mm(6”X12”) 150X300mm(6”X14”) 左右进给About feed 手动行程Manual trip 380mm(15”) 485mm(19”) 前后进给 手动行程Manual trip 180mm(7”) 180mm(7”) 手输每刻度进给Handwheel pel graduation Feed 0.02mm(0.001”) 0.02mm(0.001”) 手轮每转进给Handwheel pel revolution to 5mm(0.2”) 5mm(0.2”) 升降进给 手轮每刻度进给Handwheel pelgraduation Feed 0.005mm(0.0002”) 0.005mm(0.0002”) 手轮每转进给Handwheel pel revolution to 1mm(0.05”) 1mm(0.05”) 砂输 砂输Wheel size 180X16X32mm(7X2/3X1-1/4”) 180X16X32mm(7X2/3X1-1/4”) 马达 主轴转速Spindle speed 3600/3000rmp 3600/3000rmp 主轴马达Spindle motor 1或1.5HP 1或1.5HP 重量 净重(大约) Weight(approx) 560kgs(1232lbs) 720kgs(1584lbs) 毛重Gross weight(approx) 690kgs(1518lbs) 850kgs(1870lbs) 装箱尺寸 长X宽X高LXWXH 1300X1150X1980mm(52X45X78”) 1300X1150X1980mm(52X45X78”)